|
|
 |
|
|
|
|
 |
|
|
| |
|
|
|
|
| |
HOW TO INSTALL
PreCise™ can take less than an hour
per unit to install. Since the basic installation is 3 wires (power, switched
and ground) and an antenna that mounts anywhere with a clear view of the sky. If
you wish to capture information from an on-board system, a serial cable needs to
be connected between the PreCise hardware and the on-board system. Also, PreCise
allows you to monitor switched inputs such as safety lights on/off or a
hydraulic switch of any kind. Generally this only requires a single wire to be
connected for each switch.
|
|
The PreCise hardware is conveniently mounted in an
inconspicuous area inside the vehicle
|
PreCise allows you to monitor any number of switched inputs through
the connection of a single wire
|
|
The PreCise unit is securely mounted for heavy-duty
applications
|
|
The PreCise antennae are mounted on the vehicle with a clear view of the sky
| |
|
|
|
|
|
|
